Long Nose Pliers, Insulated, 175 mm
D203-6-INS
- Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol.
- Flame retardant, impact-resistant, bright orange outer coating with two layers of insulation provides protection against electric shock
- Slim head design for working in confined areas
- Curved handles provide greater tool control
- Forged in the USA with custom, US-made tool steel for maximum durability
- Side-cutting knives at the hinge
- Knurled jaws for sure wrapping and looping
- Hot-riveted joint ensures smooth action and no handle wobble
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Integral guards help prevent hand contact with conductive parts
- Induction-hardened cutting knives for long life
Videos
Images
High-Res JPG
d203-7-ins_photo.jpg
Klein Tools Insulated Long Nose Side-Cutting pliers are 1,000 V rated for safety on the job., The long nose is designed for grabbing and looping wire. Dual layer, orange-over-white insulation provides a warning sign that insulation may be compromised. The moulded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2012 standards for insulated tools. Cutting knives are induction hardened for a long life.
Specifications
Type:
Long-Nose Side-Cutting Pliers
Application:
For working close to live electrical circuits
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
6.9'' (17.5 cm)
Material:
Induction-Hardened Steel
Jaw Length:
1.969'' (5 cm)
Jaw Width:
0.688'' (1.7 cm)
Jaw Thickness:
0.375'' (1 cm)
Jaw Capacity:
1.72'' (4.4 cm)
Point Diameter:
0.094'' (0.24 cm)
Cutting Knives:
Standard
Knife Length:
0.572'' (1.5 cm)
Cut Style:
Side-cutting
Joint Type:
Hot-riveted
Handle Colour:
Orange
Handle Finish:
2-layer
Handle Length:
3.97'' (10.1 cm)
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
4.8 oz (136 g)
UPC:
092644710179
Warnings
- Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Wear approved eye protection.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free from any surface contaminants.
