Wire Stripper/Cutter - 8-16 AWG Stranded
11049-INS
- Individually dielectrically tested
- Gauges, cuts, strips and loops stranded wire
- Spring-loaded for self-opening
- Compact, lightweight, wire-stripping cutting tool with a narrow nose that fits into tight places
- Made in the USA
- Hardened spring steel with precision-ground stripping holes for the easy removal of insulation
- Meets or exceeds ASTM F1505-10, IEC 60900: 2018, CAN/ULC-60900-09, NFPA 70E, 2011 ed., CSA Z462
This compact, lightweight wire-stripping, cutting tool cuts, strips, loops and gauges solid wire. Dual-layer, orange-over-white insulation protects against electric shock. Meets or exceeds ASTM F1505-10, IEC 60900: 2004, CAN/ULC-60900-09, NFPA 70E, 2011 ed., CSA Z462 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol. Hardened spring steel with precision-ground stripping holes for easy removal of insulation.
Specifications
Application:
8, 10, 12, 14, 16 Stranded AWG
Special Features:
Compact and lightweight – Spring loaded for self-opening
Material:
Steel
Insulated:
Yes
Strips and Cuts:
8-16 AWG Stranded
Standard:
IEC 60900 and ASTM F1505
Overall Length:
7'' (17.8 cm)
Handle Colour:
Orange
Handle Finish:
2-Layer Insulation
Weight:
9.6 oz (272 g)
UPC:
092644740671
Additional Information
Warnings
- Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Wear approved eye protection.
- Because moisture, films or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free from any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
