Insulated Wire Stripper and Cutter
11045-INS
- Individually tested to meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated tools
- Clearly marked with the official 1,000-volt rating symbol
- Cuts, strips, loops and gauges solid wire
- Strips 10-18 AWG solid wire
- Made in the USA
- Spring-loaded action for self-opening and a narrow nose that fits into tight places
- Hardened spring steel with precision-ground stripping holes for easy removal of insulation
This compact, lightweight wire-stripping, cutting tool cuts, strips, loops and gauges 10-18 AWG solid wire. Dual-layer, orange-over-white insulation protects against electric shock. Exceeds IEC 60900 and ASTM F1505 standards for insulated tools, and is clearly marked with the official 1,000-volt rating symbol. Hardened spring steel with precision-ground stripping holes for easy removal of insulation.
Specifications
Application:
Cuts, strips, loops and gauges 10-18 solid wire
Special Features:
Compact and lightweight – Spring loaded for self-opening
Material:
Steel
Insulated:
Yes
Strips and Cuts:
10-18 AWG Solid
Standard:
IEC 60900 and ASTM F1505
Overall Length:
7'' (17.8 cm)
Handle Colour:
Orange
Handle Finish:
2-Layer Insulation
Weight:
9.6 oz (272 g)
UPC:
092644740497
Additional Information
Warnings
- Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Wear approved eye protection.
- Because moisture, films or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free from any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
