Diagonal Cutting Pliers, Insulated, Slim Handle, 21 cm
200028EINS
- Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation, with a white underlayer that provides a warning sign when the insulation may be compromised
- Multi-colour, sleek design with small thumb guards, for ease of handling and easy storage in your toolbelt
- Cuts ACSR, screws, nails and most hardened wire
- Induction-hardened cutting knives for long life
- Made in the USA
- Hot-riveted joint for smooth action and no handle wobble
- Durable, moulded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
Klein Tools 200028EINS Pliers are Electrician's Insulated High-Leverage Diagonal-Cutting pliers with 1000V rated grips and VDE certification for safety on the job. The multi-colour, sleek design with small thumb guards makes for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, moulded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.
Specifications
Type:
Diagonal-Cutting Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wire
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
8.15'' (20.7 cm)
Material:
Induction-Hardened Steel
Nose Type:
Tapered
Jaw Length:
0.83'' (2.1 cm)
Jaw Width:
1.25'' (3.2 cm)
Jaw Thickness:
0.49'' (1.2 cm)
Cutting Knives:
Standard
Cut Style:
Diagonal-cutting
Joint Type:
Hot-riveted
Handle Colour:
Orange/Grey
Handle Finish:
3-Layer Insulation
Handle Length:
4.8'' (12.2 cm)
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
11.2 oz (318 g)
UPC:
092644720079
Additional Information
Warnings
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with a live electrical source.
- Always inspect your tools before use.
- Always wear approved eye protection.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Keep tool clean, dry and free from any surface contaminants.
- Destroy tool if the insulation is damaged in any way.
