Nut Driver Set, 1000V Insulated, 9-Piece
33524
- Tool set includes 3/16'', 1/4'', 5/16'', 11/32'', 3/8'', 7/16'', 1/2'', 9/16'' and 5/8'' nut drivers
- Nut Drivers with full hollow shafts facilitate work on long bolt applications
- Durable, two-layer, moulded insulation protects against electric shock
- Tip-Ident™ quickly identifies nut driver and size
- Made in the USA
- Highly durable black, nylon case features custom-fitted tool pockets
- Replacement case available (Cat. No. 33534)
- Meets or exceeds IEC 60900: 2012, ASTM F1505-10 standards for insulated tools
This 9-piece insulated nut driver set features an assortment of popular nut driver sizes. Each is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. The highly durable black nylon case features a zip-up closure, custom-fitted tool pockets, plus an extra pocket for storage of papers and other items. Made in the USA.
Specifications
Application:
Stacked Circuit Boards, Long-Bolt Applications
Number of Pieces:
9
Included:
646-3/16-INS, 646-1/4-INS, 646-5/16-INS, 646-11/32-INS, 646-3/8-INS, 646-7/16-INS, 646-1/2-INS, 646-9/16-INS, 646-5/8-INS, 33534
Measurement Standard:
SAE
Special Features:
Tip-Ident quickly identifies nut driver size
Insulated:
Yes
Handle Type:
Cushion Grip
Shaft Length:
6'' (15.2 cm)
Overall Length:
9.75'' to 11.375'' (24.8 to 28.9 cm)
Overall Height:
3.5'' (8.9 cm)
Overall Width:
15'' (38.1 cm)
Standard:
IEC 60900 and ASTM F1505
Weight:
96 oz (2722 g)
UPC:
092644335242
Additional Information
Warnings
- Only use tools that are marked with the official international 1,000-volt rating symbol shown above, if there is any chance that the tools will make contact with a live electrical source.
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Wear approved eye protection.
- Because moisture, films or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free from any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
